field_job_occupational_field_parents_all

field_job_employment_type

job_organization_name

city

state

<h3>Job Description</h3>
Job DescriptionDescription Verdox, Inc. is dedicated to reversing climate change through the development and deployment of advanced technology.&nbsp; The company’s proprietary electro-swing process, developed at MIT, enables carbon dioxide and other acid gasses to be captured with up to 80% less energy and 70% less cost than conventional approaches.&nbsp; Verdox is backed by institutional investors and based in Boston. Verdox seeks an Electrochemical Engineer to join our R&amp;D team.&nbsp; This position reports to the Chief Technology Officer (CTO). Key Responsibilities
<ul>
<li> Build and maintain electrochemistry R&amp;D infrastructure&nbsp;</li>
<li> Comprehensive modeling of electrochemical systems, optimization and sensitivity analysis, charge-rate/capacity optimization, capacitive EDL vs Faradaic electron transfer optimization. Analyze charge transfer, chemical reactions, flow patterns, etc.</li>
<li> Simulation of different operational conditions (charge-rate, gas composition, temperature, pressure) using developed models</li>
<li> Guide design and fabrication of electrochemical/chemical/mechanical systems – including electrochemical cells, stacking of cells, gas flow channel geometry, etc.</li>
<li> Assist in the development of experimental protocols for testing of electrochemical systems – study of cycle life and calendar life of electrodes and cells; multi-step models to study degradation processes; design of custom-made testing equipment</li>
<li> Data analysis for performance optimization – prototype to product translation</li>
<li> Overall engineering support</li>
</ul>
 Skills Knowledge and Expertise
<ul>
<li> PhD in Chemical Engineering, Mechanical Engineering, or equivalent, with a focus on electrochemical systems and energy storage</li>
<li> Laboratory experience of electrochemical techniques – CV, SWV, G/PITT, RDE, RRDE, CC/CV charge-discharge, EIS</li>
<li> Advanced quantitative EIS interpretation – equivalent circuit design; data fitting</li>
<li> Advanced quantitative understanding of electrochemical thermodynamics, kinetics and transport phenomena; interfacial phenomena; porous electrodes; double layer capacitance; charge transfer kinetics (with some quantum chemistry understanding), etc.&nbsp;</li>
<li> Advanced mathematical knowledge (analytical and numerical solutions of PDEs, linear algebra, etc.); Mathematical modeling of complex electrochemical/chemical/mechanical systems</li>
<li> Some experience in assembly of electrochemical cells (preferred) – fuel cells, flow cells, batteries, capacitors, etc.</li>
<li> Some understanding of organic chemistry and reaction mechanism</li>
<li> Excel, MATLAB (or equivalent), COMSOL (or equivalent), CAD software, data analysis, DigiElch (or equivalent), EIS simulation.</li>
<li> Ability to work in cross-functional teams</li>
<li> Strong oral and written communication skills</li>
<li> Comfortable working in an evolutionary and dynamic startup environment</li>
</ul>

Electrochemical Engineer

<h3>Job Description</h3>
Job Description
 
 
About Us!
Vanderweil Engineers is a top ranked national full-service engineering firm specializing in MEP/FP, and technology services. Working in multiple sectors including Science &amp; Technology, Mission Critical, Academic, Healthcare and Commercial buildings. In our 75th year in operation with a staff of 500+ located across nine offices, we are proud to be one of the leading independently owned engineering firms in the country.
If you are looking for an opportunity to grow your career with some of the best minds in the industry, we are looking for you. Our size allows us to share resources between offices offering growth and stability in an ever-changing environment.  We have a robust library of technical resources including design standards and training opportunities. 
We pride ourselves in being an “engineering first” company with whom owners and architects want to team. You will have the support of principals and mechanical team leaders to advance your goals. Join us to do the best work of your career as a Senior Mechanical / HVAC  Engineer at our Boston, MA office. 
 
Some of the Responsibilities include:
• Senior Engineer - Science &amp; Technology focus
• Lead engineer to perform all calculations, design concepts and supervision of all project level production.
• Understands Revit to allow leadership and direction for the designs team.
• Assuring that tasks are complete, accurate and in accordance with good engineering practices.
• Develop concept designs, researches equipment selections, infrastructure utility designs for air and water systems.
• Knowledge and experience with calculations, equipment selection, ductwork distribution system, water system designs, boiler plants, chilled water plants, and construction documents
• Will attend field visits, meet with clients and vendors as necessary.
• General coordination of specific design aspects into a project.
• Will help develop and mentor junior and other team members.
• Works closely with other disciplines on multi-discipline projects, mechanical, electrical etc.
Essential Skills and Requirements 
• Bachelor of Science degree in Engineering.
• Professional Engineering license helpful.
• Professional commitment to sustainability is highly preferred.
• 7+ years’ experience and designing Mechanical/HVAC systems in high performance facilities.
• Proficient in computer use and software’s including, but not limited to; AutoCAD, Revit, Excel, Word, Bluebeam. 
• This position will interact directly with clients, a business acumen mindset is necessary.
• Background in engineering chilled water, hot water, steam and air handling plants as well as their distribution to serve facilities in the Science &amp; Technology, Commercial, Healthcare and Academic markets.
• Ability to use good judgement and make decisions with authority.
 Our Flexible &amp; Hybrid Work Culture At Vanderweil Engineers, we believe our best work is done when flexibility is offered. We know that work/life synergy is crucial to our employees, our flexible and hybrid work style allows team members to have the freedom to be innovative, and drive results their way. 
Our wellness programs are above and beyond, as our team members physical and behavioral health are a priority. 
We are an equal opportunity employer committed to diversity in the workplace.

Senior HVAC Engineer Science and Technology- Hybrid-Boston

<h3>Job Description</h3>
Job Description:\n\nThe Community Services Director is seeking an Engineer to perform engineering work in support of municipal infrastructure and capital improvement projects and provide technical assistance to senior engineering staff. The Director will be hiring an individual based on qualifications below: DEPUTY ENGINEERJOB SUMMARY: Performs routine and complex managerial, administrative, technical, and professional work in coordinating civil engineering projects generally related to the design, planning, data collection, procurement, and construction work for capital projects. This is a full-time, 40 hour per week exempt position. $1742.80 to $2525.20 per week. DUTIES AND RESPONSIBILITIES (Except as specifically noted, the following functions are considered essential to this position. The listed examples may not include all duties found in this class):1) May serve as the City’s primary Project Manager for Engineering related capital projects including but not necessarily limited to the following:a. Annual Street Pavement Programb. Annual Sidewalk Improvements Programc. Signalized Intersection Management Programd. Street Reconstruction Projectse. Sewer connection and septic permit review coordinatorf. Utility Reconstruction Projectsg. Recreation Projects2) Serves and actively participates, as the City’s representative for the following organizations:a. City of Dover Transportation Advisory Commission (TAC)b. Alternate to SRPCc. Dover Utilities Commission (DUC) and Abatement Review Teamd. May attend other organizations or committees as required to support the goals of the Department or in place of other Community Services staff.3) Performs, or directs staff to perform, the following tasks as required to support ongoing capital projects, annual regulatory compliance reporting, and day to day Community Services operations:a. Oversee the design and preparation of project documents (studies, plans, specifications, and opinions of costs) for various capital projects.b. Research records, maps and other data to obtain such typical engineering data such as location of sewer stubs, water mains, drainage, hydrants, zoning district designations or special property assessments.c. Assist in the preparation and maintenance of sanitary sewer, water, stormwater, street system maps, data bases, as-built, and other comprehensive engineering and infrastructure records and plans.d. Assist in the selection and prioritization of projects for the annual Capital Improvement Project program. Tasks include developing opinions of cost, project descriptions, and supporting documentation on each project.e. Attend and host meetings with the design consultants and contractors.f. Maintain budget tracking spreadsheets for adherence to Council approved budgetsg. Wet weather inspections and clearing of drainage catch basin grates, if required.h. Coordinate with abutters to obtain tree waivers, temporary easements, and permanent easements to complete the projecti. Coordinate with Media Services, including preparing documents for public outreach, to provide project updatesj. Coordinate with City Attorney’s office for various project related correspondences.k. Coordinate submittals, and Request for Information, as neededl. Draft and calculate field notes to document quantities, alignment, grade and locations according to project plans or to document monthly and final progress estimates.m. Prepare routine, cyclical and special records and reports of all activities, hours worked, and projects.n. Prepare or review consultant construction cost estimates by calculating dimensions, profile specifications, and quantities of materials. Cost estimation preparation requires general knowledge of engineering principals and current market conditions for the construction industry.o. Coordinate with the Finance Department on the development of Request for Proposals, Qualifications, or Bids.p. Review proposals, qualifications, and construction bids and prepare recommendation to award based on lowest responsible bids, competency of vendors and consultants, and the selection criteria.q. Lead Project Manager for the design and construction of capital construction projects. Duties in this capacity include the review and comment on all project invoices to ensure conformance with approved City Council budget allocations.r. Observe construction sites to determine conformance of sites to design specifications and to ensure that construction meet City minimum standards and project specifications.s. Perform a variety of office related functions, including preparing permits, correspondence, maps, presentation materials, brochures, reducing field notes, printing materials, answering phones, and responding to inquiries from contractors, developers, property owners, staff, and the general public.t. Prepare federal and state grant applications involving public works engineering; meet with and exchanges correspondence with federal, state and other municipal personnel.u. Develop and maintain effective working relationships with public and private organizations, elected and appointed officials, City department heads, City employees, consultants, and the general public.v. Familiar with and executes safe work procedures associated with assigned work.w. Review and provide comments for private development projects (plans, specs, reports, studies, etc.) for compliance with codes, regulations, and standards, adequacy of applications for permits and compliance with approved plans.x. Review and provide comment on proposed regulations from various regulatory agencies (NHDES, EPA, etc.)y. Review applications for utility permits, street use permits, franchise utility permits, etc. Issue routine permits.z. Prepare traffic, utility and other studies and reports.aa. May assume duties and responsibilities of City Engineer, Environmental Project Manager, or Engineering Technician, when necessary.bb. Familiar with and executes safe work procedures associated with assigned work.cc. Review, evaluate, and respond to public comments received through the City’s Service Call platform and assigned to Engineering. Evaluation of comments may require field visits.dd. Draft standard operating procedures as assigned by the City Engineer for approval by Community Service Division Heads.ee. Perform other related duties as required.KNOWLEDGE, SKILL AND ABILITY REQUIREMENTS: Thorough knowledge of the principles of civil engineering particularly as applied to the design and construction of highways, drainage, water, sewer and other public works facilities. Considerable knowledge of modern construction and maintenance techniques and materials; knowledge of green infrastructure storm water practices including design, performance and regulation; ability to set up and solve complicated engineering problems; ability to conduct engineering research work and to write technical reports; ability to communicate effectively both verbally and in writing; ability to establish and maintain effective working relationship with employees, city, state, and federal officials, consultants and contractors; ability to multi-task and have flexibility in arranging daily schedule.EDUCATION/LICENSURE/CERTIFICATION REQUIREMENTS: Bachelor's degree with major course work in Civil Engineering, plus 10-15 years progressively responsible experience in the practice of civil engineering; OR any equivalent combination of education and experience which demonstrates possession of the required knowledge, skills and abilities including project management. Must possess valid motor vehicle operator’s license. Professional Engineer Licensure in NH required (Civil or Environmental Engineering). Preference may be given for Local Public Agency (LPA) Certification for managing and overseeing federal aid for transportation related project. The applicant will be required to obtain certification as an LPA within six months after hire. Valid motor vehicle operator license required. ASSISTANT ENGINEER JOB SUMMARY: Performs engineering design, planning, and layout work for civil engineering related projects such as utility and transportation construction. Other duties include; roadway, environmental, stormwater, and other community development projects and capital programs. Assists the Deputy City Engineer in application of principles, methods, and techniques of civil engineering technology. Responsibilities include supervision, construction oversight, preparation and coordination of plans, specifications, reports, estimate, field studies, and surveys. This is a full-time, 40 hour per week non-exempt position. $37.70 to $54.60 per hour.DUTIES AND RESPONSIBILITIES (Except as specifically noted, the following functions are considered essential to this position. The listed examples may not include all duties found in this class):1) Assist the City Engineering Staff with tasks to support their Engineering related capital projects including but not necessarily limited to the following:a. Annual Street Pavement Programb. Annual Sidewalk Improvements Programc. Signalized Intersection Management Programd. Street Reconstruction Projectse. Water Service Line Inventoryf. Sewer connection and septic permit reviewg. Utility Reconstruction Projectsh. Environmental Projects2) Design and prepare plans and specifications for various capital projects including, but not necessarily limited to, those for the following Departments: Planning, Community Services, and Recreation.3) Review project specifications and confer with Deputy City Engineer and/or City Engineer concerning assistance required such as plan preparation, acceptance testing, and evaluation of field conditions, design changes, and reports.4) Review engineering plans and specifications, coordinate required advertising for bids, review construction bids and make necessary recommendations based on lowest and best bids, competency of vendors and consultants, and the selection criteria.5) Prepare construction cost estimates by calculating dimensions, profile specifications, and quantities of materials.6) Research records, maps and other data to obtain such typical engineering data such as location of sewer stubs, water mains, hydrants, etc. and zoning district designations or special property assessments.7) Survey project sites to obtain and analyze topographical details of sites.8) Draft and calculate field notes to document quantities, alignment, grade and locations according to project plans or to document monthly and final progress estimates.9) Take detailed meeting notes and prepare notes for distribution.10) Conduct observations of active construction sites to determine conformance of site to design specifications and to ensure that construction and repair of transportation, water, wastewater, and stormwater systems meet control requirements.11) Attend various committees or organizational meetings as staff liaison in the absence of the City Engineer, Deputy City Engineer, Environmental Project Manager, or Facilities Project Manager.12) Assist in the preparation and maintenance of sanitary sewer, water, stormwater, street system maps, data bases, as-built, and other comprehensive engineering and infrastructure records and plans.13) Perform a variety of office related functions, including preparing permits, correspondence, maps, presentation materials, brochures, reducing field notes, printing materials, answering phones and responding to inquiries from contractors, developers, property owners, staff, and the general public.14) Review applications for utility permits, street use permits, franchise utility permits, etc. Issue routine permits through the City’s online portal.15) Assist in the review of private project development plans for compliance with codes, regulations, and standards, adequacy of applications for permits and compliance with approved plans.16) Review and evaluate storm water reports. Assist in the evaluation of transportation and traffic impacts of development proposals, permits, rezones, plats, etc.17) Prepare federal and state grant applications and various other permits (i.e. wetlands) for municipal projects; meet with and exchanges correspondence with federal, state and other municipal personnel.18) Provide technical assistance and engineering support to other departments and city personnel.19) Respond to inquiries from contractors, consultants, developers, staff, and the public.20) Assists in development and help maintain guidance documents on use of Best Management Practices (BMPs). 21) Assist in the implementation, administration, and management of Community Services related city ordinances, policies and activities to comply with the MS4 storm water requirements.22) Develop and maintain effective working relationships with public and private organizations, elected and appointed officials, city departments and employees, clients, and the general public.23) May assume duties and responsibilities of Deputy City Engineer or Engineering Technician, when necessary.24) Familiar with and executes safe work procedures associated with assigned work.25) Perform other related duties as required.KNOWLEDGE, SKILL AND ABILITY REQUIREMENTS: Thorough knowledge of the principles of civil engineering particularly as applied to the design and construction of highways, drainage, water, sewer and other public works facilities; considerable knowledge of modern construction and maintenance techniques and materials; knowledge of green infrastructure storm water practices including design, performance and regulation; ability to set up and solve complicated engineering problems; ability to conduct engineering research work and to write technical reports; ability to communicate effectively both verbally and in writing; ability to establish and maintain effective working relationship with employees, city, state, and federal officials, consultants and contractors.EDUCATION/LICENSURE/CERTIFICATION REQUIREMENTS: Bachelor's degree with major course work in Civil Engineering, plus 4 years progressively responsible experience in the practice of civil engineering; OR any equivalent combination of education and experience which demonstrates possession of the required knowledge, skills and abilities. Must possess valid motor vehicle operator’s license. Engineering in training (EIT) certificate required. Professional Engineer preferred or working toward PE licensure. Preference may be given for Local Public Agency (LPA) Certification for managing and overseeing federal aid for transportation related project. Valid motor vehicle operator license required. ENGINEER JOB SUMMARY: Performs entry- to staff-level engineering work in support of municipal infrastructure and capital improvement projects. Work includes design drafting, drainage and stormwater calculations, construction oversight, and preparation of technical reports, plans, and specifications. Provides technical assistance to senior engineering staff, contractors, consult

26-038.3 Engineer, Full-Time

<h3>Job Description</h3>
Job Description
Team up with the most innovative company where Imagination becomes reality! E Ink is the originator, pioneer, and commercial leader in ePaper technology. The Billerica Research &amp; Development team is thriving and growing as we help develop products that are changing how people access information every day. We are seeking qualified candidates who are self-driven, looking to advance their career and become a high-impact player on a team.
Based on technology from MIT’s Media Lab, E Ink has transformed and defined the eReader market. Its Electrophoretic Display products make it the worldwide leader for ePaper. The Company’s corporate philosophy aims to deliver revolutionary products, user experiences and environmental benefits through advanced technology development.
Our diversity of people, backgrounds, experiences, thoughts and perspectives is fostered to create an inclusive work environment.
Our culture is built on value commitments to innovation, quality, results, integrity, community, people, and collaboration that fosters a strong employee engagement, teamwork, safety and wellness.
We offer a competitive/generous benefits package that fits the needs of our employees. It includes health, dental, vision, wellness programs, employee discounts, 401k matches, ongoing development, advancement opportunities and more. This position is also eligible for our bonus program. (see E Ink │ Our Company)
And we're looking for a Research Engineer!
About the position:
E Ink is seeking a highly motivated, detail-oriented, and hands-on scientist/engineer to join our Research and Advanced Development Division. This individual will be part of a multidisciplinary team and will work on device fabrication and characterization for novel electrophoretic display systems. 
Job Responsibilities:
<ul>
<li>Build and test electrophoretic devices</li>
<li>Multilayer display device fabrication</li>
<li>Mechanical testing of parts and materials</li>
<li>Electro-optical testing</li>
<li>Establish quality control testing for new technologies</li>
<li>Deliver on project commitments and actively pursue contingency plans</li>
<li>Communicate results to team members in reports and technical presentations</li>
</ul>
Qualifications:
<ul>
<li>Undergraduate degree in laboratory science/engineering OR</li>
<li>1+ years of work experience in a laboratory setting</li>
<li>Self-directed, motivated, and hands-on personality</li>
<li>Ability to work in a fast-paced, highly interdisciplinary work environment with a team to effectively accomplish shared goals</li>
</ul>
Preferences:
<ul>
<li>Familiarity with data analysis</li>
<li>Pilot laboratory experience (lamination, laser cutting, etc.)</li>
<li>Experience with optical films or display testing</li>
</ul>
Benefits:
<ul>
<li>Competitive total compensation package</li>
<li>Medical, dental and vision on 1st day</li>
<li>Company 401K match</li>
<li>20 PTO days</li>
<li>Generous sick leave policy</li>
<li>Casual day to day work environment</li>
<li>Hybrid/flexible work environment (for some positions)</li>
</ul>
E ink is committed to a diverse and inclusive workforce. E Ink is an equal opportunity employer and does not discriminate on the basis of race, ethnicity, gender, identity, sexual orientation, veteran’s status, disability, age, or on any basis prohibited by federal and state law. 
Salary Range Disclosure: The annual base salary range for this position is $75,000 to $105,000 not including any variable pay. The total compensation package may include performance-based incentives, discretionary bonuses, and other variable pay components. The salary range for this position reflects a reasonable estimate at the time of posting and may vary based on factors such as experience, skills, education, certifications, and location.

Research Engineer 1060S-5

<h3>Job Description</h3>
Job DescriptionDescription:
Hoyle Tanner has a new position open for an initiative-taking Sr. Hydraulic Engineer with experience in open channel flow (rivers/streams). You will lead and support hydraulic analysis and scour evaluation for bridge and culvert projects. This position has career pathways into business development or project management, and we will assist you on a successful career journey.
We are a welcoming, collaborative, respectful, encouraging, and diverse community where you can achieve your career goals. Our midsize allows you to be visible and heard. Hoyle Tanner offers you a flexible schedule, remote work opportunities and a generous sign-on bonus. See our impressive benefits package for more information. 
 
Location: Chelmsford, MA
 A short 27 miles from Boston, our office is centrally located just south of the confluence of US Route 3, Route 495, and the Lowell Connector, with a stop along the MBTA’s Lowell bus route 15, and a short drive from the Lowell and Billerica commuter rail stops. This office is located along the developing Route 129 corridor in Chelmsford. 
 
Primary Responsibilities:
<ul>
<li>Lead and conduct hydraulic studies for bridge and culvert projects, including river, stream, and floodplain crossings</li>
<li>Perform detailed scour analyses for new and existing bridge structures and recommend appropriate scour protection measures</li>
<li>Utilize hydrologic and hydraulic modeling software (e.g., HEC-RAS, HEC-HMS, SRH-2D) and GIS-based project mapping tools for project analysis and design</li>
<li>Prepare technical reports, calculations, maps, and documentation for regulatory submittals and project records</li>
<li>Coordinate with multidisciplinary project teams, including structural engineers, environmental scientists, and construction staff</li>
<li>Provide technical guidance and mentorship to junior engineers and review their work for accuracy and compliance</li>
</ul>
 
Requirements:
Qualifications:
<ul>
<li>BS or MS degree in civil or environmental engineering, or related field</li>
<li>PE Licensure</li>
<li>10+ years of relevant experience</li>
<li>Exceptional oral/ written communication skills</li>
<li>Salary is contingent on experience</li>
</ul>
Hoyle Tanner is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Hoyle Tanner does not currently offer sponsorship and participates in E-Verify. See our impressive benefits package for more information.

Senior Hydraulic Engineer - Chelmsford, MA

<h3>Job Description</h3>
Job DescriptionAt WHOOP, we're on a mission to unlock human performance and healthspan. WHOOP empowers members to perform at a higher level through a deeper understanding of their bodies and daily lives. We are seeking a highly skilled Senior ML Platform Engineer to join our ML Platform team. This role is pivotal in scaling our ML infrastructure and enabling the efficient deployment and monitoring of machine learning models across cloud environments. As a senior contributor, you will act as a force multiplier—building robust abstractions, platforms, and tooling to supercharge our Data Science and AI teams. You will design and implement scalable systems that operationalize machine learning at WHOOP with speed, reliability, and precision. Your work will directly support our use of AI to enhance team efficiency, automate decision-making, and personalize member experiences.RESPONSIBILITIES:
<ul>
<li>Architect, build, own, and operate&nbsp;scalable ML infrastructure in cloud environments (e.g., AWS), optimizing for speed, observability, cost, and reproducibility.</li>
<li>Create, support, and maintain&nbsp;core MLOps infrastructure (e.g., MLflow, feature store, experiment tracking, model registry), ensuring reliability, scalability, and long-term sustainability.</li>
<li>Develop, evolve, and operate MLOps platforms and frameworks that standardize model deployment, versioning, drift detection, and lifecycle management at scale.</li>
<li>Implement and continuously maintain end-to-end CI/CD pipelines for ML models using orchestration tools (e.g., Prefect, Airflow, Argo Workflows), ensuring robust testing, reproducibility, and traceability.</li>
<li>Partner closely with Data Science, Sensor Intelligence, and Data Platform teams to&nbsp;operationalize and support&nbsp;model development, deployment, and monitoring workflows.</li>
<li>Build, manage, and maintain both real-time and batch inference infrastructure, supporting diverse use cases from physiological analytics to personalized feedback loops for WHOOP members.</li>
<li>Design, implement, and own automated observability tooling (e.g., for model latency, data drift, accuracy degradation), integrating metrics, logging, and alerting with existing platforms.</li>
<li>Leverage AI-powered tools and automation to reduce operational overhead, enhance developer productivity, and accelerate model release cycles.</li>
<li>Contribute to and maintain internal platform documentation, SDKs, and training materials, enabling self-service capabilities for model deployment and experimentation.</li>
<li>Continuously evaluate and integrate emerging technologies and deployment strategies, influencing WHOOP’s roadmap for AI-driven platform efficiency, reliability, and scale.</li>
</ul>
QUALIFICATIONS:
<ul>
<li>Bachelor’s or Master’s Degree in Computer Science, Engineering, or a related field; or equivalent practical experience.</li>
<li>5+ years of experience in software engineering with a focus on ML infrastructure, cloud platforms, or MLOps.</li>
<li>Strong programming skills in Python, with experience in building distributed systems and REST/gRPC APIs.</li>
<li>Deep knowledge of cloud-native services and infrastructure-as-code (e.g., AWS CDK, Terraform, CloudFormation).</li>
<li>Hands-on experience with model deployment platforms such as AWS SageMaker, Vertex AI, or Kubernetes-based serving stacks.</li>
<li>Proficiency in ML lifecycle tools (MLflow, Weights &amp; Biases, BentoML) and containerization strategies (Docker, Kubernetes).</li>
<li>Understanding of data engineering and ingestion pipelines, with ability to interface with data lakes, feature stores, and streaming systems.</li>
<li>Proven ability to work cross-functionally with Data Science, Data Platform, and Software Engineering teams, influencing decisions and driving alignment.</li>
<li>Passion for AI and automation to solve real-world problems and improve operational workflows.</li>
</ul>
This role is based in the WHOOP office located in Boston, MA. The successful candidate must be prepared to relocate if necessary to work out of the Boston, MA office. Interested in the role, but don’t meet every qualification? We encourage you to still apply! At WHOOP, we believe there is much more to a candidate than what is written on paper, and we value character as much as experience. As we continue to build a diverse and inclusive environment, we encourage anyone who is interested in this role to apply. WHOOP is an Equal Opportunity Employer and participates in&nbsp;E-verify&nbsp;to determine employment eligibility.&nbsp; It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. The WHOOP compensation philosophy is designed to attract, motivate, and retain exceptional talent by offering competitive base salaries, meaningful equity, and consistent pay practices that reflect our mission and core values. At WHOOP, we view total compensation as the combination of base salary, equity, and benefits, with equity serving as a key differentiator that aligns our employees with the long-term success of the company and allows every member of our corporate team to own part of WHOOP and share in the company’s long-term growth and success. The U.S. base salary range for this full-time position is $150,000-$210,000. Salary ranges are determined by role, level, and location. Within each range, individual pay is based on factors such as job-related skills, experience, performance, and relevant education or training.&nbsp;In addition to the base salary, the successful candidate will also receive benefits and a generous equity package. These ranges may be modified in the future to reflect evolving market conditions and organizational needs. While most offers will typically fall toward the starting point of the range, total compensation will depend on the candidate’s specific qualifications, expertise, and alignment with the role’s requirements. Learn more about WHOOP.

Senior ML Platform Engineer

<h3>Job Description</h3>
Job DescriptionField AI&nbsp;is transforming how robots interact with the real world. We are building risk-aware, reliable, and field-ready AI systems that address the most complex challenges in robotics, unlocking the full potential of embodied intelligence. We go beyond typical data-driven approaches or pure transformer-based architectures, and are charting a new course, with already-globally-deployed solutions delivering real-world results and rapidly improving models through real-field applications. About the Job We are looking for a Research Engineer for our humanoid manipulation efforts. In this role, you’ll work at the intersection of robotics research and applied engineering—building, testing, and refining manipulation capabilities that will accelerate autonomous control and loco-manipulation of humanoids. You’ll collaborate closely with engineers, research scientists, and product leads to conceptualize and design novel manipulation strategies, develop experimental platforms, and deliver impactful systems that directly feed into Field AI’s robot learning pipelines. Crucially, you will also play a key role in pushing the frontiers of development of robotics foundation models—designed to be embodiment agnostic, with your initial efforts focused on humanoid platforms. This role is about steering the frontiers of robotics research toward practical, real-world use cases, ensuring that breakthroughs in humanoid manipulation translate into scalable autonomy for robots of diverse forms.What You’ll Get To Do
<ul>
<li>1. Advance Humanoid Manipulation Research &amp; Development</li>
<li>Drive humanoid manipulation projects from ideation to deployment.</li>
<li>Design, prototype, and evaluate manipulation strategies across diverse tasks.</li>
</ul>
 
<ul>
<li>2. Build Systems that Bridge Research &amp; Deployment</li>
<li>Translate research insights into working robotic systems for real-world use.</li>
<li>Ensure systems are robust, reproducible, and aligned with data-collection needs.</li>
</ul>
 
<ul>
<li>3. Drive Robotics Foundation Model Development</li>
<li>Contribute to large-scale data collection and learning pipelines powering foundation models.</li>
<li>Ensure model development remains embodiment agnostic, enabling transfer across diverse robotic platforms.</li>
<li>Collaborate with research scientists to integrate manipulation data into scalable robot learning systems.</li>
</ul>
 
<ul>
<li>4. Collaborate Across Disciplines</li>
<li>Partner with mechanical/electrical engineers on robot hardware integration.</li>
<li>Work with teleoperators to refine interfaces and improve manipulation outcomes.</li>
<li>Act as a bridge between autonomy research and applied robotics.</li>
</ul>
 
<ul>
<li>5. Rapidly Iterate &amp; Deliver</li>
<li>Prototype quickly and run experiments in the field.</li>
<li>Balance research exploration with fast, tangible progress for immediate goals.</li>
</ul>
What You Have
<ul>
<li>Bachelor’s, Master’s, or PhD in Robotics, Computer Science, Mechanical Engineering, or related field.</li>
<li>2+ years of hands-on experience in robotics manipulation (academic or industry).</li>
<li>Expertise in robot kinematics, dynamics, and control, particularly for manipulation.</li>
<li>Strong problem-solving mindset, able to thrive in fast-moving, collaborative teams.</li>
<li>Strong software development skills in C++ and/or Python, with experience in robotics middleware (ROS, ROS 2, or similar).</li>
<li>Track record of implementing and evaluating robotic systems in real-world environments.</li>
<li>Passion for tackling challenging problems andthe courage to challenge the status quo.</li>
</ul>
The Extras That Set You Apart
<ul>
<li>Experience with humanoid robots or multi-fingered robotic hands.</li>
<li>Prior work in learning-based manipulation (imitation learning, reinforcement learning, etc.).</li>
<li>Familiarity with teleoperation systems and human-robot interaction.</li>
<li>Publications or open-source contributions in robotics conferences/journals.</li>
<li>Experience with large-scale data collection and dataset management.</li>
<li>Passion for bridging research frontiers with practical, field-ready robotics.</li>
</ul>
Compensation and BenefitsOur salary range is between ($70,000 - $300,000 annual), but we take into consideration an individual's background and experience in determining final salary; base pay offered may vary considerably depending on geographic location, job-related knowledge, skills, and experience.&nbsp; Also, while we enjoy being together on-site, we are open to exploring a hybrid or remote option. Why Join Field AI?We are solving one of the world’s most complex challenges: deploying robots in unstructured, previously unknown environments. Our Field Foundational Models™ set a new standard in perception, planning, localization, and manipulation, ensuring our approach is explainable and safe for deployment. You will have the opportunity to work with a world-class team that thrives on creativity, resilience, and bold thinking. With a decade-long track record of deploying solutions in the field, winning DARPA challenge segments, and bringing expertise from organizations like DeepMind, NASA JPL, Boston Dynamics, NVIDIA, Amazon, Tesla Autopilot, Cruise Self-Driving, Zoox, Toyota Research Institute, and SpaceX, we are set to achieve our ambitious goals. Be Part of the Next Robotics RevolutionTo tackle such ambitious challenges, we need a team as unique as our vision — innovators who go beyond conventional methods and are eager to tackle tough, uncharted questions. We’re seeking individuals who challenge the status quo, dive into uncharted territory, and bring interdisciplinary expertise. Our team requires not only top AI talent but also exceptional software developers, engineers, product designers, field deployment experts, and communicators. We are headquartered in always-sunny Mission Viejo (Irvine adjacent), Southern California and have US based and global teammates.&nbsp; Join us, shape the future, and be part of a fun, close-knit team on an exciting journey! We celebrate diversity and are committed to creating an inclusive environment for all employees. Candidates and employees are always evaluated based on merit, qualifications, and performance. We will never discriminate on the basis of race, color, gender, national origin, ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability, or any other legally protected status.

1.54 Research Engineer - Humanoid Manipulation

<h3>Job Description</h3>
Job DescriptionDescription:
BETA is seeking an experienced Senior Stormwater Engineer to lead our New Hampshire and Northern New England focused Stormwater and Water Resources Team. The position will interact with a multi-disciplinary team of professionals in the New England area and will provide leadership and client development specifically in water resources engineering, stormwater treatment, watershed planning, stormwater related construction management, and permitting. Our Stormwater/Water Resources team of professionals comes together to create innovative design solutions for our public-sector clients utilizing nature-based solutions to improve infrastructure, address water quality issues and mitigate for climate impacts such as flooding. Projects may include: stormwater treatment, stormwater control retrofits; green infrastructure; stream and streambank restoration; wetland and buffer restoration; hydraulic and hydrologic modeling; drainage and stormwater studies; stormwater asset management and stormwater management permitting including MS4 compliance programs. 
Responsibilities: 
<ul>
<li>Perform, manage, and oversee engineering on stormwater/water resources planning and design projects</li>
<li>Technical design lead on concurrent projects</li>
<li>Recommend solutions to engineering issues </li>
<li>Provide responsive client service through strong and prompt communication</li>
<li>Lead/Mentor young professionals.</li>
<li>Assist with business development and manage project pursuits</li>
<li>Collaborate across internal disciplines and office locations</li>
<li>Properly scope, schedule and budget assignments/projects</li>
<li>Continue to broaden technical skills within the chosen discipline</li>
<li>Lead team, client and public meetings </li>
</ul>
Preferred location is BETA’s Manchester, NH office. Candidates should have flexibility to work from our other office locations. BETA also offers a hybrid work schedule, allowing employees to request working remotely up to 2 days per week.
Growth Opportunities:
<ul>
<li>BETA encourages and promotes employee advancement and career development</li>
<li>Leads to potential advancement to more senior technical positions and project management</li>
</ul>
Requirements:
Required Experience/Skills :
<ul>
<li>Bachelor's degree in civil or environmental engineering</li>
<li>Professional Engineer (PE) License</li>
<li>10+ years of related engineering experience in stormwater/water resources projects </li>
<li>Demonstrated strong background in civil or environmental engineering particularly in stormwater treatment and drainage design</li>
<li>Hydrologic and hydraulic modeling with software programs </li>
<li>Knowledge of and experience with the implementation of MS4 and other NPDES programs</li>
<li>Skilled in writing and ability to prepare formal reports</li>
<li>Strong leadership and organizational skills</li>
<li>Proficient in AutoCAD, Civil3D and ArcGIS/Pro experience</li>
<li>Must be able to collect field data and measurements </li>
<li>Must be able to lift/move objects weighing up to 40 pounds</li>
<li>Must be able to perform field work in both hot and cold weather (rain and/or snow)</li>
<li>Must be able to stand or sit for long periods of time</li>
<li>Must have a valid driver’s license and reliable transportation</li>
</ul>
Preferred Experience/Skills: 
<ul>
<li>Project Management experience </li>
<li>Certified Environmental Stormwater Compliance Professional (CESCP) </li>
<li>Certified Stormwater Manager (CSM)</li>
<li>Certified Professional in Storm Water Quality (CPSWQ)</li>
</ul>
About BETA:

BETA Group, Inc. is a New England based consultant engineering firm and leader in the fields of transportation, traffic, structural, civil/site, and water/wastewater engineering; landscape architecture; urban design and planning; GIS/asset management; environmental sciences and permitting; and construction services. BETA is 100% employee-owned and offers an exceptional compensation and benefits package including:
<ul>
<li>Medical, Dental, Vision, and Additional Voluntary Life Insurance</li>
<li>Short-Term &amp; Long-Term Disability Coverage</li>
<li>Medical &amp; Dependent Care Flexible Spending Account (FSA)</li>
<li>Employee Stock Ownership Plan (ESOP)</li>
<li>Tuition Assistance</li>
<li>Professional Development</li>
<li>Employee Engagement Program</li>
<li>401(k) Plan with annual 401k match </li>
</ul>
BETA is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

Senior Stormwater Engineer

<h3>Job Description</h3>
Job DescriptionAbout Us:Cyvl is a Boston-based tech startup revolutionizing the way civil engineering firms and governments map and manage transportation infrastructure. Our enterprise-grade hardware and software solutions leverage 3D mapping sensors to capture LiDAR, imagery, and GPS data, retrofitted to our customers' vehicles. This data is processed through our AI-powered cloud pipelines to generate actionable condition and geospatial reports, saving our customers time, money, and resources. We are in a phase of rapid growth, disrupting a massive and outdated market with our innovative solutions. About the Role:As an MLOps Engineer at Cyvl, you will lead the development of the platforms and tooling that empower our Machine Learning team to move quickly and efficiently. Your primary focus will be optimizing our data curation and annotation workflows, ensuring that all labeled datasets and metadata are centrally organized, easily discoverable, and reusable. Beyond data management, you’ll also support experimentation, model training, and deployment workflows to help us bring ML solutions to production faster and with greater reliability. This is a highly cross-functional role where you’ll collaborate with ML engineers, software engineers, and product managers to enable scalable and reproducible machine learning systems.Responsibilities:
<ul>
<li>Build and maintain scalable pipelines for data ingestion, preprocessing, labeling, and metadata management.</li>
<li>Centralize all ML annotations, datasets, and labels using best-in-class data management and labeling tools.</li>
<li>Evaluate and integrate third-party tools and frameworks to increase efficiency of the ML development process.</li>
<li>Contribute to infrastructure decisions and promote best practices across the MLOps lifecycle.</li>
<li>Design and maintain platforms that accelerate ML experimentation, hyperparameter tuning, and training workflows.</li>
<li>Collaborate with ML engineers to streamline and automate deployment of models to production environments.</li>
</ul>
Required Skills:
<ul>
<li>3+ years of experience in an MLOps or related role, supporting a team of at least 3 ML engineers.</li>
<li>Strong hands-on experience with Kubernetes and container orchestration for ML workloads.</li>
<li>Experience with the AWS SageMaker suite of tools</li>
<li>Familiarity with modern data labeling and management platforms (e.g., Label Studio, Kili, Scale AI, CVAT, Prodigy, Postgres, etc.).</li>
<li>Experience designing, maintaining, and scaling ML pipelines and tooling.</li>
<li>Proficiency in Python and experience with ML libraries (e.g., PyTorch, TensorFlow, scikit-learn).</li>
<li>Experience with the Go programming language</li>
<li>Experience with experiment tracking tools (e.g., MLflow, Weights &amp; Biases).</li>
<li>Strong knowledge of DevOps, CI/CD practices, and cloud infrastructure (AWS preferred).</li>
<li>Excellent communication and collaboration skills, with the ability to work effectively across teams.</li>
</ul>
Nice to Have:
<ul>
<li>Experience with data versioning tools like DVC or LakeFS.</li>
<li>Exposure to data lake / warehouse solutions like Snowflake or BigQuery.</li>
<li>Knowledge of vector databases and semantic search.</li>
<li>Familiarity with Argo Workflows</li>
<li>Previous work in startup or high-growth environments.</li>
<li>Background in building internal tools and dashboards for ML teams.</li>
</ul>
Ideal Cyvl Candidate:
<ul>
<li>Self-motivated, self-starter with a zeal to win</li>
<li>Great communicator; strong oral and written skills</li>
<li>Ability to think creatively</li>
<li>Hands-on problem solver who enjoys cracking difficult nuts</li>
<li>Quick study – able to pick up and apply new concepts in a hurry</li>
<li>Track record of achievement</li>
<li>Enjoys working on and helping to build outstanding teams</li>
<li>Demonstrates an entrepreneurial spirit and gets stuff done</li>
</ul>
What We Offer:
<ul>
<li>Competitive salary and equity package</li>
<li>Comprehensive health, dental, and vision insurance</li>
<li>Opportunities for professional growth and development</li>
<li>A collaborative and innovative work culture with a tight-knit team of ~25 employees</li>
</ul>
If you're passionate about building powerful ML platforms, and you thrive on enabling teams to move faster and smarter with their data, we want to hear from you. At Cyvl, you’ll have the opportunity to take ownership of critical MLOps infrastructure, shape the way our ML engineers work, and have a direct impact on our product and customers. Join us in transforming the future of infrastructure with AI and world-class tooling.

Machine Learning Operations Engineer

<h3>Job Description</h3>
Job DescriptionAbout KR Wolfe
KR Wolfe, Inc. is a nationwide leader in specialized installation, integration, and field services for advanced environments in healthcare, education, commercial, and government sectors. Guided by our mission to “Make the technology of tomorrow work today,” we take pride in the quality of our work and the professionalism of our team.
Position Overview
KR Wolfe is seeking Assembly Technicians to support an upcoming project in the Boston area assembling and preparing wheelchairs for our client, Medline.
The ideal candidate is mechanically inclined, detail-oriented, and comfortable using hand tools to complete light assembly tasks. This role requires a hands-on approach, teamwork, and a commitment to safety and quality. This is a full time position, schedule would be Monday through Friday 8am - 5pm, assembling in a facility.&nbsp;
Key Responsibilities
<ul>
<li>
Assemble wheelchair components according to instructions and quality standards.
</li>
<li>
Use hand tools such as wrenches and screwdrivers safely and effectively.
</li>
<li>
Inspect completed units for function and appearance.
</li>
<li>
Maintain a clean, organized, and safe work area.
</li>
<li>
Collaborate with KR Wolfe team members and client representatives.
</li>
<li>
Follow all company, client, and site safety policies.
</li>
</ul>
Qualifications
<ul>
<li>
Previous assembly or mechanical experience preferred (training provided).
</li>
<li>
Proficiency with basic hand tools required.
</li>
<li>
Strong attention to detail and ability to follow written instructions.
</li>
<li>
Ability to stand, bend, and lift up to 50 lbs.
</li>
<li>
Dependable, punctual, and professional.
</li>
</ul>
 Why Join KR Wolfe
At KR Wolfe, we don’t just build — we make technology work for people. You’ll be part of a team that values safety, integrity, and quality, and you’ll gain experience working on projects that make a difference in healthcare environments.
Powered by JazzHR
LuXf80qP3P

1,319 Engineering Jobs